Heat Shrinkable Sleeves
MARK PERMANENCE TEST
“Mark permanence” is, generally speaking , the ability of a product to remain legible after exposure to either abrasion or aggressive fluids. Impact, Inc. has adopted the most widely accepted mark permanence tests for its products. When tested, Impact, Inc.’s Advanced Wire Marking Sleeves and iTags show mark permanence quality beyond the minimum requirements. The sleeves exceed the minimum mark permanence requirements for SAE AS81531 (formerly MIL-M-81531).
Flat, seamless heat shrinkable tubing is attached to fanfold paper with a reusable, adhesive tape backing. Fanfold paper also gives you the advantage of stacking and organizing after printing. The unique format provides a handy work-in-progress list and makes application a simple task for the installer.
Our products are printed on the AWMS-245 Plus Printer, which comes with a USB cable, 984′ long ribbon and prints up to 5 inches per second. The AWMS Labeling Printing Software is included at no charge.
The Advanced Wire Marking System produces wire marker sleeves and cable tags for the easy identification of electrical wire and mechanical tubing of all types. These wire marker sleeves and cable tags are not only permanent, but they are also economical to generate in-house as needed.
Our wire markers are manufactured from cross-linked polyolefin, a flame retardant material that will tolerate exposure to temperatures as high as 135°C. The wire marker sleeves conform to UL224 as well as AMS-DTL 23053/5, Class 1 & 3 for material and functional requirements. Our iTags, manufactured from high density polyethylene conform to AMS-DTL 23053/6, Class 1 for material and functional requirements. Furthermore, they are resistant to common fluids, lubricants and solvents. Once printed, the wire marker sleeves and iTags are ready for installation without any additional treatment.
Ordering Info 2:1 Heat Shrinkable Sleeves
|Pieces per Box|
|AWMS 1/8 x ** - W (xxx)||.075 - .115||14-20||2200 or 1100|
|AWMS 3/16 x ** - W (xxx)||.100 - .175||10-16||2200 or 1100|
|AWMS 1/4 x ** - W (xxx)||.130 - .215||8-12||1100 or 550|
|AWMS 3/8 x ** - W (xxx)||.195 - .350||3-8||1100 or 550|
|AWMS 1/2 x ** - W (xxx)||.260 - .450||1-6||1100 or 550|
|AWMS 3/4 x ** - W (xxx)||.425 - .675||4/0 - 1||300|
|AWMS 1 x ** - W (xxx)||.600 - .900||4/0 400 mcm||300|
Ordering Info 3:1 Heat Shrinkable Sleeves
|Pieces per Box|
|(3x) 1/8 x ** - W (xxx)||.045 - .110||16-22||2200 or 1100|
|(3x) 3/16 x ** - W (xxx)||.065 - .160||12-18||2200 or 1100|
|(3x) 1/4 x ** - W (xxx)||.85 - .210||10-16||1100 or 550|
|(3x) 3/8 x ** - W (xxx)||.130 - .340||4-12||1100 or 550|
|(3x) 1/2 x ** - W (xxx)||.176 - .435||8-1||1100 or 550|
|(3x) 3/4 x ** - W (xxx)||.260 - .675||6-4/0||1100 or 550|
NOTE: Wire size ranges are typical and are based on THHN wire. Different classes of wire may have different diameters than those used. The buyer should confirm that wire diameters are within the actual use range of the product selected for purchase. White and yellow are standard colors. Sleeves can be purchased pre-cut into multiple segments.
** = 1.5 or 2.0 inch length
(xxx) = pieces per box