Conduit / Pipe Markers
Coiled plastic conduit and pipe markers are designed to identify conduit and piping in a wide variety of environments. To install, simply “snap” the coil around the conduit or pipe. After installation, the coils remain in place on the conduit or piping due to material memory from the coiling process. The coils can be manufactured in various sizes, based on total outside diameter of the conduit.
Compared with banding adhesive tape, coils do not require the need for conduit cleaning or preparation, therefore they can be installed very quickly, reducing installation time and expenses.
These coils are sized to fit completely around the circumference of the conduit. Coils are manufactured from a vinyl material, with or without text, in solid or dual colors, and can be scored to create smaller pieces. Legends are sub-surface printed, protected by a layer of plastic.
Product Information & Specifications
Product Info:
- No surface preparation needed
- Service Temperature Range: -40° F to 160° F
- Coiled construction quickly snaps around conduit
- Markers can be removed and then re-installed
- Made for indoor use – outdoor material available upon request
Standard Colors
Other colors available upon request
Related Products:
Dimensional Data & Part Numbers
| Marker Type | Conduit/Pipe Diameter | Character Height | Marker Length |
|---|---|---|---|
| TM | 1/4" - 3/8" | 1/4" | 3" |
| A | 1/2" - 1" | 1/2" | 8"(can be scored to four 2" pieces)" |
| B | 1-1/8" - 2-1/4" | 3/4" | 8"(can be scored to four 2" pieces)" |
| C | 2-3/8" - 3-1/4" | 1-1/4" | 12"(can be scored to six 2" pieces)" |
| D | 3-3/8" - 4-1/2" | 1-1/4" | 12"(can be scored to six 2" pieces)" |
| E | 4-5/8" - 5-7/8" | 1-1/4" | 12"(can be scored to six 2" pieces)" |